Flo King In-Tank Floating Skimmer

Flo King In-Tank Floating Skimmer
The In-Tank Floating Skimmer removes floating particulates and lightweight surface oil. Complete polypropylene assembly includes Skimmer Head, Skimmer Trash Trap, associated piping, parts, and filter cartridge(s). Skimmer Trash Trap is available in three lengths—10, 15 and 20 inches (25, 38 and 50 cm) and in three different configurations: Single (holds one filter cartridge), Double (holds two cartridges), and Quad (holds four cartridges). Note: Skimmer cannot remove heavy oil or large volumes of oil. See Bulletin 22 for details. Click here for video and see Skimmer Instructions at this link.

Skimmer with Single Skimmer Trash Trap

In-Tank Floating Skimmer
with Single Skimmer Trash Trap

Used only with BX1200 & BX650. Holds one filter cartridge and includes all items shown above. Specify 10" (SKMS10), 15" (SKMS15) or 20" (SKMS20) length when ordering. Also specify BX1200 or BX650 pump-body length and freeboard (distance from top of tank to solution surface).

Skimmer with Double Skimmer Trash Trap

In-Tank Floating Skimmer
with Double Skimmer Trash Trap

Used only with BX1200, BX3000, BX5000, BXL2500 & BXL5000. Holds two filter cartridges and includes all items shown above. Specify 10" (SKMD10), 15" (SKMD15) or 20" (SKMD20) length when ordering. Requires Double Cartridge Holder (not included).

Skimmer with Quad Skimmer Trash Trap

In-Tank Floating Skimmer
with Quad Skimmer Trash Trap

Used only with BX3000, BX5000 & BXL5000. Holds four filter cartridges and includes all items shown above. Specify 10" (SKMQ10), 15" (SKMQ15) or 20" (SKMQ20) length when ordering. Requires Quad Cartridge Holder (not included).

Skimmer Head

SKMH
Skimmer Head

Fits all Skimmer models. Skimmer Head is welded to Slide Body (pipe), as shown above.

Single Skimmer Trash Trap

Single Skimmer Trash Trap

Specify 10" (SKMTT10), 15" (SKMTT15) or 20" (SKMTT20) length when ordering. Holds one filter cartridge.

Neck, Core, Bolt & Top Plate

Neck, Core, Bolt & Top Plate

Used only with Single Skimmer Trash Trap. Specify 10" (SKMN10), 15" (SKMN15) or 20" (SKMN20) length when ordering. Includes all items shown above as one-piece unit.

Double Skimmer Trash Trap

Double Skimmer Trash Trap

Specify 10" (SKMDT10), 15" (SKMDT15) or 20" (SKMDT20) length when ordering. Holds two filter cartridges.

Quad Skimmer Trash Trap

Quad Skimmer Trash Trap

Specify 10" (SKMQT10), 15" (SKMQT15) or 20" (SKMQT20) length when ordering. Holds four filter cartridges.

SKMP Piping for Skimmer

SKMP
Piping for Skimmer

SKMP includes all parts shown above. Specify length of Stand Pipe when ordering replacement.

SKMSP
Skimmer Stand Pipe

Specify length when ordering replacement.

SKMP3/4 Skimmer Elbow

SKMP3/4
90-Degree Polypro Elbow

Theaded at both ends, 3/4"

SKMPEXT

Threaded Cross Pipe, 4" long x 3/4" diameter

SKMNUT for Skimmer

SKMNUT
Bottom Nut

Used only with Single Skimmer Trash Trap

SHS3 Skimmer Screw

SHS3
Screw for Skimmer Head

Pack of three Screws

CVPD Double Conversion Plate

CVPD
Conversion Plate for Double Skimmer

CVPQ Quad Conversion Plate

CVPQ
Conversion Plate for Quad Skimmer

SKMB Skimmer Bolt

SKMB
Skimmer Bolt

Used only with Single Skimmer Trash Trap, at bottom of Core.

DCH Double Cartridge Holder

DCH
Double Cartridge Holder

Required for Skimmer with Double Trash Trap. Specify material when ordering. CPVC is gray in color (DCH-CPVC); polypro is white (DCH-PP)

Fits BX650, BX1200, BX3000,
BX5000, BXL2500 & BXL5000

QCH Quad Cartridge Holder

QCH
Quad Cartridge Holder

Required for Skimmer with Quad Trash Trap. Specify material when ordering. CPVC is gray in color (QCH-CPVC); polypro is white (QCH-PP)

Fits BX650, BX1200, BX3000,
BX5000, BXL2500 & BXL5000