Custom Masters/Flo King
Phone: 407-331-4634
Fax: 407-331-0575

FAQ

I HAVE A FAIRLY DEEP TANK AND WANT TO KEEP THE SOLUTION TEMPERATURE AND CHEMICAL COMPOSITION UNIFORM. IS THERE ANYTHING YOU CAN RECOMMEND?

This Mid-Tank Pumping Kit (MTP Kit) allows you to draw solution from deeper in the tank and discharge it higher in the tank to help maintain consistent solution temperature and chemical composition. This is useful during cold weather, for example, when solution may be significantly cooler near the bottom of the tank than at the surface.

The MTP Kit can be used with the BX650, BX1200, BX3000, BX5000, BXL2500 and BXL5000.

midtank kit faq

The kit includes Threaded Adapter, Coupling, Strainer, and up to 36 inches (91.4 cm) of Pipe. You can add or subtract pipe length as necessary.

Important: In order to prime pump, solution must be above the weep hole and Impeller on pump body when the motor is turned on. Once primed, the pump will continue to operate and draw solution through the Mid-Tank Pumping Kit and out the Discharge Port.

However, if the pump is turned off when solution is below the weep hole and Impeller, solution must be added to the tank to
re-prime the pump.

cutaway