Custom Masters/Flo King
Phone: 407-331-4634
Fax: 407-331-0575
email: floking@sprintmail.com

 

Flo King Low-Profile BXL2500 Repair Parts
Several parts shown below are available in CPVC plastic (gray in color) and polypropylene (white). Where a separate part number does not exist, specify CPVC or polypro when ordering. Some parts also available in Kynar (PVDF) and stainless steel. Contact us for information on Kynar and SS replacement parts. See this link for BXL2500 Disassembly & Belt Replacement Instructions.

 

BXL2500 Motor

2500 MOTOR
Motor for BXL2500

Includes Motor Pulley, Fan Cover, Fan Cover Hardware, Fan Blade, Adjustable Stand-Off, & 2500 MBHW Motor Base Hardware (four SS Hex-Head 1/4-20 Screws, 1-1/4" Long), four 1/4" SS Lock Washers, & four 1/4" SS Flat Washers

Standard BXL2500 Motor is 0.33 hp. A special "High-Density" Motor rated at 3/4 hp is used primarily to pump thick solutions (e.g., sulfuric/phosphoric acid electropolishing). Three-phase
Motors are 1 hp.

 

 

SHR Swiveling Impeller Housing


2500 SHR
Swiveling Impeller Housing for BXL2500

Includes three Filter Screws (2500 FS), Lock Screw (2500 SHLS) & Teflon Strap
(2500 STRAP)
.

Order # in polypro is 2500 SHR-PP.

Fits BX3000, BX5000, BXL2500
& BXL5000
.




 

Filter Screw

FS6
CPVC Filter Screw, Pack of Six.
Thread Length 3/4" (1.9 cm)


Order # in polypro is FS6-PP

Fits BX650, BX1200, BX3000,
BX5000, BXL2500 & BXL5000.
Thread size is 3/8-16.

 

Lock Screw

2500 SHLS
CPVC Lock Screw for BXL2500
Swiveling Impeller Housing.
Thread Length 0.5 inch (1.27 cm)

Order # in polypro is 2500 SHLS-PP.

Fits BX3000, BX5000, BXL2500
& BXL5000
.

 

Impeller BXL2500

2500 IMP
Impeller for BXL2500

Includes 2500 TSS (Super Slinger) &
2500 TIW (Impeller Washer
)

Order # in polypro is 2500 IMP-PP.

 

TSS Super Slinger

2500 TSS
Super Slinger for BXL2500

Fits BX3000, BX5000, BXL2500
& BXL5000.

TIW Impeller Washer

2500 TIW
Impeller Washer for BXL2500


Fits BX3000, BX5000, BXL2500
& BXL5000
. Outside Diameter as
shipped from factory is 3/4" (19.05 mm)

 

VBS Boot Seal

2500 VBS
Boot Seal for BXL2500


Fits BX3000, BX5000, BXL2500
& BXL5000

 



2500 NB12 Belt

2500 NB12
New-Style Belt for BXL2500 with Standard Motor Base, 12" Long
(30.48 cm)

Manufacturer's number on Belt
is usually Gates 5205M15 HNBR.

Old-Style Belt for BXL2500 pumps
made prior to Dec. 2002 may be marked Bando Synchro-Link 200 XL C18105.



 

2500 NB15 Belt

2
500 NB15
New-Style Belt for BXL2500 with Long
Motor Base, 15" Long (38.1 cm)


Manufacturer's number on Belt
is usually Gates 6705M15 HNBR.
Also fits BXL5000.

Old-Style Belt for Long-Motor-Base BXL2500 pumps made prior to Dec. 2002 may be marked Bando Synchro-Link
200 XL 050 A04112.

 



2500 STRAP

2500 STRAP
Teflon Strap for
Swiveling Impeller Housing

Secures Impeller Housing to
pump Body. Fits BX3000, BX5000, BXL2500 & BXL5000. Strap is about
9-3/8" long x 1/4" wide
(23.33 cm x 0.635 cm).

 

 

Spacer and Screw

2500 SPC (Spacer)

Sold individually. Includes one
1/4-20 SS Screw, 1-3/4" Long,
Phillips Head, Flat.

Four Spacers required per pump.

 

 

2500 NSHPB


2500 NSHPB (__LENGTH)
Teflon-Covered Shaft with Stainless-Steel Shaft Pulley & Shaft Bearings

Includes 2500 NSPR (New-Style SS Shaft Pulley), two Shaft Bearings, Teflon-Coated Shaft, 2500 IHW (Inside Heel Washer,
1-5/8 x 5/8"), & VBS (Boot Seal)

When ordering, specify pump-body length by measuring "A" Dimension on drawing at this link: BXL2500 Specs

Standard Shaft is made of stainless steel. Titanium-Tip Shaft and Hastelloy-C276-Alloy-Tip Shaft available as a precaution for aggressive solutions that may
attack SS.
All Shafts covered with Teflon Heat-Shrink Tubing.

 

BXL2500 Shaft Only

 

2500 SHAFT (__LENGTH)
Teflon-Covered Shaft


When ordering, specify pump-body
length by measuring
"A" Dimension on drawing at this link:
BXL2500 Specs

Standard Shaft is made of stainless steel.


Standard Shaft is made of stainless steel. Titanium-Tip Shaft and Hastelloy-C276-Alloy-Tip Shaft available as a precaution for aggressive solutions that may attack SS. All Shafts covered
with Teflon Heat-Shrink Tubing.




2500 HSBBA



2500 HSBBA (__LENGTH)
Heel, Shaft, Shaft Bearing
& Belt Assembly

Includes 2500 NSPR (New-Style SS Shaft Pulley), two Shaft Bearings, Teflon-Covered Shaft, Heel, Inside Heel Washer
Outside Heel Washer, Heel Hardware,
VBS (Boot Seal) & Belt
|
When ordering, specify pump-body length by measuring "A" Dimension on drawing at this link: BXL2500 Specs

Also specify NB12 (12" Belt for Standard Motor Base) or 2500 NB15 (15" Belt
for Long Motor Base)

Standard Shaft is made of stainless steel. Titanium-Tip Shaft and Hastelloy-C276-Alloy-Tip Shaft available as a precaution for aggressive solutions that may attack SS. All Shafts covered
with Teflon Heat-Shrink Tubing.

 

 

2500 BBR

2500 BBR (__LENGTH)
Base & Body for BXL2500

Includes four Spacers &
2500 PBHW Pump Base Hardware
(four 1/4-20 SS Screws, 1-3/4" Long
Phillips Head, Flat
)

For repairs outside of the Flo King factory, you must order the 2500 BBR Base & Body Assembly to avoid machining operations associated with separate purchase of either the Base or the Body.

Specify pump-body length and pump material of construction when ordering.
|
To determine pump-body length, measure "A" Dimension on drawing at this link: BXL2500 Specs

To identify material of construction, check color of pump Body submerged in solution. Gray in color is CPVC; white is polypro. Those are the two most popular materials. We also offer stainless steel and
PVDF (Kynar).

 

 

Pump Base Hardware


2500 PBHW
Pump Base Hardware for BXL2500

Four 1/4-20 SS Screws, 1-3/4" Long, Phillips Head, Flat.
Hardware secures Pump Base
& Body to Motor Base.



2500 SHBEAR

2500 SHBEAR
Shaft Bearing for BXL2500

Sold individually. Two required.

2500 NSPR New SS Shaft Pulley

2500 NSPR
New-Style Shaft Pulley for BXL2500


Stainless Steel Shaft Pulley with Keyway

 

2500 PR Old Shaft Pulley

2500 PR
Old-Style Shaft Pulley for BXL2500


Aluminum Shaft Pulley with holes
for set screws.
Used only on BXL2500
units made prior to Dec. 2002.

 

 

2500 MB12

2500 MB12
Standard Motor Base Assembly,
12" Long (30.48 cm), with Heel
& Belt for BXL2500

Includes NB12 Belt, Inside Heel Washer, Outside Heel Washer, & 2500 MBHW Motor Base Hardware (four SS Hex-Head 1/4-20 Screws, 1-1/4" long; four 1/4" SS Lock Washers; & four 1/4" SS
Flat Washer
s)

Motor Base made of aluminum.
Also available in stainless steel
on special-order basis.


2500 MB15

2500 MB15
Long-Motor-Base Assembly, 15" Long
(38.1 cm), with Heel & Belt for BXL2500

Includes NB15 Belt, Inside Heel Washer, Outside Heel Washer, & 2500 MBHW Motor Base Hardware (four SS Hex-Head 1/4-20 Screws, 1-1/4" long; four 1/4" SS Lock Washers; & four 1/4" SS Flat Washers)

Motor Base made of aluminum.
Also available in stainless steel
on special-order basis.

 

BXL2500 Motor Base Hardware

2500 MBHW
Motor Base Hardware for BXL2500


Secures Motor Base to Motor.
Four SS Hex-Head 1/4-20 Screws (1-1/4" Long), four 1/4" SS Lock Washers, &
four 1/4" SS Flat Washers.

 

BXL2500 Motor Bearing

2500 MOTBEAR
Motor Bearing for BXL2500

Sold individually. Two required.

 

BXL2500 Heel


2500 MBH
Heel for BXL2500

Includes Inside Heel Washer, Outside Heel Washer, & Heel Hardware (three
10-24 x 1/2" Black Socket Cap Screws
& three #10 SS Flat Washers
)


2500 HLHDW

2500 HLHDW
Heel Hardware for BXL2500


Three 10-24 x 1/2" Black
Socket Cap Screws & three
#10 SS Flat Washers

 

Inside Heel Washer

2500 IHW
Inside Heel Washer for BXL2500

1-5/8" OD (41.2 mm); hole diameter 5/8" (15.8 mm). Fits BXL2500 & BXL5000.

Included with purchase of Heel.

 

Outside Heel Washer

2500 OHW
Outside Heel Washer for BXL2500

1-7/16" OD (36.5 mm); hole diameter 15/16" (23.8 mm). Fits BXL2500
& BXL5000.


Included with purchase of Heel.

 

2500 BDC12

2500 BDC12
Belt-Drive Cover for BXL2500
with Standard Motor Base (12")

Includes two 2500 BDCRP (SS Reinforcement Plates) & 2500 BDCHW12 Belt-Drive Cover Hardware (ten 8-32 x 5/16 SS Phillips Panhead Screws
& ten 8-32 SS Flat Washers
)

 

2500 BDC15

2500 BDC15
Belt-Drive Cover for BXL2500
with Long Motor Base (15")

Includes ten 8-32 x 5/16 Phillips
SS Panhead Screws & ten 8-32
SS Flat Washers


2500 BDCHW

2500 BDCHW
Belt-Drive Cover Hardware for
BXL2500 with Standard Motor Base
& Long Motor Base


Ten 8-32 x 5/16 SS Phillips
Panhead Screws
& Ten 8-32 Flat SS Washers


 

2500 BDCRP

2500 BDCRP
Stainless-Steel Reinforcement Plate for
BXL2500 with Standard Motor Base


Sold individually. Two SS Reinforcement Plates, 3-5/8" long x 1/2" wide
(9.2 cm x 1.27 cm), are used in conjunction with 2500 BDCHW Hardware to secure Belt-Drive Cover to Motor Base. Reinforcement Plates are not required on Long-Motor-Base BXL2500.

Belt-Drive Cover Hardware
not included with Reinforcement Plate.



 

2500 TEF

 

2500 TEF
Teflon Heat-Shrink Tubing for
BXL2500 Shaft

Used for all BX3000, BX5000, BXL2500
& BXL5000 Shafts. Sold by the inch.
Outside diameter 0.70".


2500 NPR New SS Motor Pulley for BXL2500

2500 NPR
New-Style Motor Pulley for BXL2500

Stainless steel. Left-hand thread.

 

2500 PR Old Motor Pulley for BXL2500

2500 PR
Old-Style Motor Pulley for BXL2500

Aluminum Motor Pulley. Left-hand thread. Used only on BXL2500 units made prior
to Dec. 2002.


Discontinued Motor Pulley

DISCONTINUED
Original 2500 Motor Pulley


Original aluminum Motor Pulley with Stem. No longer available.

 

2500 FCOV Fan Covers

2500 FCOV
Fan Cover for BXL2500

Includes Three Mounting Screws,
10-32 x 1/4 SS Phillips Panhead.

Specify whether you have a Baldor or Leeson Motor when ordering: (Top) Fan Cover for Baldor Motor, 5" x 1-1/4"
(12.7 x 3.17 cm);
(Bottom) Fan Cover for Leeson Motor,
5 x 1-3/4" (12.7 x 4.44 cm
)

Note: Color of current BXL5000 Fan Covers is black. Only units made prior to Dec. 2002 have blue Fan Covers.

BXL2500 Fan Blades

2500 FBR
Fan Blade for BXL2500

Includes Fastener (Screw or Clip)

Specify whether you have a Baldor or Leeson Motor when ordering:
(top photo) Fan Blade with Screw for Baldor Motor, (bottom photo) Fan Blade with Clip
for Leeson Motor
.

2500 ASO Adjustable Stand Off



2500 ASO
Adjustable Stand-Off for BXL2500

Welded onto Motor at factory.
(Top) ASO for Standard Motor Base; (bottom) ASO for Long Motor Base.

 

Special Shaft Tip

TITANIUM-TIP SHAFT
OR HASTELLOY-TIP SHAFT

Titanium-Tip or Hastelloy-C276-Alloy-Tip Shaft is a special factory-installed item recommended as a precaution for aggressive acids that may attack standard stainless-steel Shaft on BX3000, BX5000, BXL2500 & BXL5000. Tip is 2-1/2" long (6.35 cm) and threads onto standard SS Shaft & into Impeller Insert.

 

 

Impeller Insert

IMPELLER INSERT

Threaded stainless-steel Insert is installed on all BX3000, BX5000, BXL2500 & BXL5000 Impellers at Flo King factory. Special titanium Inserts and Hastelloy-C276-alloy Inserts are available as a precaution for aggressive solutions that may attack standard SS Insert. Material of construction should be same for Shaft
(or Shaft Tip) and Insert.

 

LOOKING FOR MORE
BXL2500 PARTS?

Click this link for photos and
descriptions of BXL2500 new
parts and accessories.